Bubble Counter - Regulator Type - Manual

Step 1 | Filling With Water

Open top part of the bubble counter
Take supplied O-ring out of the bubble counter chamber
Fill the chamber with water*
*We do not recommend mineral oil as it may contaminate your diffuser.

 



Step 2 | Compression Collars

 

Remove the compression collar
Feed tubing through the collar

 



Step 3 | Connecting Tubing

 

 

Push the tubing onto the nipples at each end of the bubble counter

 



Step 4 | Installing O-ring

 

Install supplied O-ring on the nipple of the needle valve

 



Step 5 | Installing Bubble Counter

 

 

 

Screw bubble counter onto the needle valve. Tighten firmly to ensure an air-tight seal*
*Check for leaks using soap/water mix once the system is operational.

 

Contact Us

Not finding what you're looking for? Contact Us Directly